Customized Digital Dual Gauge with Alarm 52MM Water Level+Sewage Level Meter for Water/Sewage Level Sensor 0-190ohm HTG Boat Car 12V24V
NOTE: The Gauge sell single, The Sensor is sell single , if you choose gauge , the package is not included sensor , if you choose sensor , the package is not included gauge ,
2022 New 52mm Universal 2 in 1 Dual Gauge
Application: Marine Boats/Truck/Bus/Motor Home/Hot Rod/Generators
About the gauge:
The device works, with a little delay (about 20 seconds) of changes in the readings. Apparently, it is done in order not to react to the splash of water in the tank.
Feature:
– 52mm diameter Two in One Gauge show with easy installation
– Programmable Input Resistance Ohm Signal to adapt different fuel /water/temperature sensor
0-190Ω, 0-180Ω, 10-180Ω, 240-33Ω, 240-30Ω
– High Resolution View under sunshine
– Installation Diameter: 52mm (2inch)
– Reverse polarity protection and anti-fogging performance
– Working Voltage:12V/24V
– Working temperatures: – 40 to 85°C
– IP66 Waterproof
INSTALLATION GUIDE
1. Cut an Φ52mm (2-1/16") hole in the panel (II) allow a clearance of 55mm (2 3/16”). behind the panel.
2. Remove fastening ring (I), insert gauge from front. Tighten gauge (III) using fastening ring ( I)
3. Connect cables according to the diagram/label.
Setting Menu：“Unit” “R 1” “R 2”
1.Hold & Press the button, Power On Gauge, the LED screen will show Switch Show
Unit, R1, R2
2.Unit
Fuel Gauge, Water Level, HTG Sewage Level: %
Water temperature: ℃ or ℉
3.R1—Configure Top Row Signal Range
Press Button to switch 000 ~006
For example, LED will show 001, which means 0~180ohm, then release the button and wait digital flash to complete to save setting
4.R2—Configure Top Row Signal Range
Press Button to switch 000 ~006.
For example, LED will show “002” , which means 10~180ohm, then release the button and wait digital flash to complete to save setting
Connection:
gauge black line connect to the GND(-)
Gauge red line connect to the DC12V24V（+）
Gauge green line connect to the water level sensor brown signal line
gauge white line connect to the sewage level sensor brown signal line
gauge yellow line connect to the button line
Package:1PCS Gauge+Manual+Cable( not include sensor)
this package is not included sensor , just the gauge
Sensor supporting Customized , if you need customized , please contact to us
Water Level Sensor:
– Resolution range: 21 mm
– Signal: 0-190ohm(can customized)
– Working volt:9-32VDC
– Operating current: ≤60mA
– Operating temperature: -30~+75℃
– Storage temperature: -40~+85℃
– Sensor Length: 100mm-600mm(can customized)
– Thread:41.5mm BSP1 1/4
Package:1 X Water Level Sensor+Manual( not include gauge)
this package is not included gauge,
Sewage Level Sensor:
– Resolution range: 21 mm
– Signal: 0-190ohm(can customized)
– Working volt:9-32VDC
– Operating current: ≤60mA
– Operating temperature: -30~+75℃
– Storage temperature: -40~+85℃
– Sensor Length: 100mm-600mm(can customized)
Package:1 X Sewage Level Sensor+Manual
this package is not included gauge,
