Compatible With:
-Support OBD2 Protocol: ISO14230-4(KWP2000), ISO15765-4(CAN-BUS), ISO9141-2, the others are not.
-Compatible With: 90% Small Gasoline Cars after 2008.(Not for Suzuki, Not for Ssangyong, Not for Renault, Not for Mazda, Not for Fiat, Not for Dayoo, Not for Dodge, etc.)
Incompatible With:
1.Not for All Cars before 2007.
2.Not for All Diesel/Hybrid/Electric Vehicles, Pickup Trucks, Passenger Cars, Motorcycle, Bicycle etc.
Feature:
1. OBD Mode:(If your car is support OBD2 protocol, it will prefer to reading the date from OBD mode.)
Display Function: Car Speed(KM/H, MPH), RPM, Voltage, Coolant Temperature(Some Cars will not display), Oil Temperature
(Some Cars will not display), Fuel Consumption(Some Cars will not display), Average Fuel Consumption(Some Cars will not display), Date and Time, Driving Distance, Driving Time, Turbo Pressure(Some Cars will not display), Read/Erase Trouble Code, Engine Load, Slope Meter(Roll Angle/Pitch Angle).
2. GPS Mode: (If your car is not compatible with OBD2 mode, you can enter into GPS mode)
Display Function: Speed, Voltage, Driving Direction, Driving Time, Altitude, Driving Distance, Date and Time, Number of Satellites, Slope Meter(Roll Angle/Pitch Angle).
Alarm Function:
Specification:
Size:156*16*83mm / 6.14*0.63*3.27inch
Material: ABS+PC
Color: Black
Screen Type: 4.5inch LCD Touch Screen
Power Supply: via Car OBD2 Socket
Setting Language: English/Chinese/Japanese
Packing list:
1 x HUD
1 x 2M OBD2 Cable
1 x Anti Slip Mat
1 x English Manual
FAQ
1.Can't work normally?
The first time installation requires reading the vehicle protocol and will takes 3 minutes,please wait patiently:
–Put the vehicle in "P"or "N" gear, pull up the handbrake and start the vehicle to ensure that the vehicle is in an idle state;
–Connect the hud to your car obd2 socket;
–Turn on the power switch of the hud, the system will automatically scan the vehicle data, it takes about 3 minutes, please wait patiently;
–When screen displays the water temperature and fuel consumption of the vehicle, the initialization is complete, and it can be used normally.
2.No display on the screen, no power?
Check whether the OBD cable is loosely connected, try to connect it several times. If it still does not work, please change another car to test, and analyze whether the OBD interface of the car is broken. If the OBD interface is broken, please repair the OBD interface and then connect the machine again.
3.Unable to shut down or automatically start and stop with the car?
Enter system setting mode, find “shutdown mode”
–01. Intelligence: The system automatically monitors and shuts
down;
–02. ECU communication failure: It is recommended to select
this option for gasoline-electric hybrid vehicles and vehicles with
automatic start-stop function;
–03. Battery voltage is low: judge the battery voltage is lower
than the set value and shut down, the default is 13.2;
–04. Countdown time: You can adjust the shutdown time after
the vehicle is turned off, the default is 15 seconds (this item is
only for when the machine uses GPS data).
