For other models,please click the following link. Tick one or more boxes.
( Tips: Please confirm the required product length and width before purchase! )
Car decorative and protective strips
Sealing rubber strip for roof rack
Car decorative strips, made of soft plastic PVC material, with galvanized surface, can be bent appropriately and firmly pasted; Used for interior and exterior decoration of vehicles, to enhance aesthetics, block scratches, prevent collisions; cockpit trim molding ,grill trim molding,tail lamp molding, mirror trim molding, fender trim, body side molding, bumper trim molding, and is versatile for various vehicles
Installation method: Remove surface dust, debris, oil stains, water stains, wax, etc., and keep the surface flat, clean, and dry; Apply adhesive aids to the surface being adhered; Align the double-sided adhesive to the position; Press with your hand to ensure it is firmly attached; It is not allowed to paste repeatedly; Avoid washing the car within 2 days
Attention: The pasting effect is better when the ambient temperature is not less than 20 degrees Celsius; When the ambient temperature is below 20 degrees, it is necessary to use a hot hair dryer to heat both sides appropriately, or stick it in a warm garage for better results
Due to different vehicles, please measure and determine the required width and length before purchasing The following is for reference only
A – Interior 3 m x (6/8/10) mm
B – Roof 3 m x (18/20) mm
C – Rearview mirror 2 m x 4 mm
D – Horizontal bar above the window 6 m x 20 mm
E – Horizontal bar below the window 5 m x 15 mm
F – Door panel anti-collision strip 5 m x (20/25/30) mm
G – Front and rear lights 3 m x 8mm
H – Front and rear bumpers 3 m x 20mm
I – Front air grille 5 m x (6/8) mm
