*Adjustable Charging Current * Adjust the current with one touch 11kW(6A/8A/10A/13A/16A)/ 22kW(6A/10A/13A/16A/20A/24A/32A). The delayed charging time can be adjusted by holding button (0.5 hours – 8 hours). No cumbersome operation via the app, easy adjustment directly on the wallbox.
*Family Friendly Packaging* This packaging includes 3 RFID cards as well as brackets and screws for wall mounting, ideal for home use. It can set card swipe mode or plug and play mode.
*Safety Assurance*This charging station has type B 30mA AC + DC 6mA technology and a double fuse to protect the charger and electric vehicle during charging. With electronic lock, cannot unplug during charging, ensuring your charging safety.
*Wide Compatibility* Support 1-phase or 3-phase, wallbox with Type 2 socket, One wallbox for all your EV charging needs, no matter if your car is Type2, Type1, GB/T Or TS-NACS
Power: Max 11kW (16A, 3-phase), Max 22kW(32A, 3-phase)
Voltage: 400V
Current: 11kW (6A/8A/10A/13A/16A)
22kW(6A/10A/13A/16A/20A/24A/32A)
Operating Temperature: -25˚C to 55˚C
Standard: Type 2 IEC 61851-1, IEC 62196-2
Certification: CE
IP Rating: IP65(Wallbox) IP44(CEE Plug)
RCD: Type B: AC 30mA + DC 6mA
RFID: YES
Protection degree: IP65
Warranty: 2-year-warranty
dé 11kW/22kW Mobile Wallbox CEE Plug to Type 2 Socket
Plug & Play, No Installation Needed
Efficient Charging Max 11kW
3x Faster than Schuko 3,68kW
Providing maximum 11kW power for efficient charging.(16A, 3-phase)
Support 3-phase and 1-phase
Note:The charging speed is determined by the minimum power of wallbox,type 2 cable and the vehicle
Superior Protection Against Dust and Water Ingress
Offers IP65 rating for the wallbox and IP44 for the CEE plug,
even charge in rainy day
Tips:The CEE plug is only IP44 waterproof.avoid direct exposure to rain
Multiple Scene Usage
At home Supermarket/Charger station/On the road
Easy to Carry
1. Hold the wallbox and apply upward pressure to remove it from the bracket
2. Take the wallbox with you on your travels
3. Easy charging at 16a sockets on the side of the road as well
Family-friendly Packaging
This packaging includes 3 RFID cards as well as brackets and screws for wall mounting, ideal for home use. It enables personalized access and protection for multiple users.
How to Get Started Use？
Step 1: plug the CEE plug into the socket.
Step 2: plug the type 2 male in the 11kW wallbox
Step 3: plug the type 2 female in the vehicle
Step 4: use the RFID card
Note:Don't put the type 2 plug into your car charging port before you switch the current and the time
(schuko plug and type 2 plug are both connected:current and delay time >>>>unchangeable)
How to install the wallbox kit?
1. Tighten the screws of wall mount bracket.
2. Drilling and tightening screws according to wallmount holes.
3. Check that the wall mount is securely fastened and does not wobble.
4. Align the charging station's back holes with the wall bracket screws and hang it.
5. Drill holes and tightenthe screws for securing the charging station.[Optional)
Adjust the Current by Car
Stop Charging
step 1: use the RFID Card again to stop the charge
step 2: pull out the type 2 plug
What's in the box?
【11kW /22kW Wallbox】
1.11k/22kW Mobile Wallbox
2.Plug Holder
3.Installation tool and RFID card
4.Microfibre cloth
5.User guide
6.Carry bag
What is included in the Traveller Set?(11kW)
What is included in the Traveller Set?(22kW)
【With 5M Type 2 Cable】
1. 11kW 22kW Mobile Wallbox
2. 11kW/ 22kW Type 2 Cable 5m
3. CEE adapter 16A to 32A
4. Plug holder
5. Installation tool and RFID card
6. Microfibre cloth
7. User guide
8. Carry bag
【11kW/ 22kW Open End Ver.】
1. 11kW/ 22kW Mobile Wallbox Open End Ver.
2. CEE Plug
3. Plug holder
4. Installation tool and RFID card
5. Microfibre cloth
6. User guide
7. Carry bag
From open end wire to wallbox 1.8m
FAQ
Q: Charging Speed:How quickly does the EV Charger Work?
A: The Mode 3 EV charger can charge up to 63km/hr when set to 11kW(16A,3-Phase)
Q: How are the voltages shown?
A: Only one voltage is displayed, real-time voltage from L1 firewire to zero wire
Q: Can wallbox be adapted to be started without the FRID card?
A: The default is Plug and Play mode,swipe the RFlD card at the sensing area for at least 10 secondsuntil the status icon changes to wifiØ , then it is Plug & Play withoutRFlD card. Swipe 10s again to reactivate the RFlD function.
