This universal wheel alignment tool is designed for wheel alignment for all vehicles, accurately check the castor and camber angle to ensure the good driving performance and the stability of the vehicle.
Feature:
1.Precision Wheel Alignment Tool – Magnetic Gauge is a professional tool for positioning the camber and rear camber of your wheels or brake discs to help you accurately check the amount of camber change before reinstallation or return the shock absorber to its original lintel position after disassembly and assembly of the suspension. Provides an accurate numerical reference for you to adjust the wheel orientation angle.
2.LED Digital Display and Positioning Bubble — The digital alignment gauge reads the tilt value via LED screen. Compared to the horizontal tube scale of the conventional crash gauge, the change in value is easier to see and can be seen at a glance even in a dark environment. When using the fall gauge, centering the positioning level can help make the test results more accurate.
3.Magnetic Base & Measuring Angle ±90° – The base of the Adjustable Wheel Orientation has a strong magnet, the outer diameter is 45mm, the adsorption area is smaller than the base area of most fall gauges on the market, and the small contact area makes the accuracy more accurate. The measurable angular range ranges from -90° to +90°. Down Arrow indicates an outward tilt, and Up Arrow indicates an inward tilt.
4."ON 0FF" & "ZERO" button — "ON 0FF" button: Click to power on, press and hold for three seconds to power off. "ZERO" button: Reset button, click to reset the value to 0, adjust the eccentric screw so that the digital wheel alignment shows the expected value. It is suitable for wheel tilt angle positioning and repair of all vehicles and can also be used for replacement measurement of rear tie rods.
How to use:
1.Check with a four-wheel aligner to determine whether the camber angle needs to be adjusted;
2. Remove the four-wheel aligner sensor (clamp) and tire;
3. Suck the magnetic level on the brake disc and center the horizontal bubble of the level;
4. Press the""on I off"" switch of the level gauge to start up. After the interface number is stable, press ""zero"" to return to zero;(the interface displays the numbers ""0.0"" and ""zero"" at the same time)
5. Replace the upper bolt of the original shock absorber with the upper eccentric bolt;
6. Adjust the eccentric screw to make the level reach the expected value, and lock the eccentric nut with a torque wrench;(the ""inside arrow"" arrow faces the inside, which means it is adjusted down; the arrow goes beyond the outside, which means it is adjusted up)
7. Install the tire and fixture (sensor), remeasure with the locator and correct other angle data.
Package Include:
1pc x Magnetic Gauge Tool(battery not include)
1.Transition: 1cm=10mm=0.39inch.
2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
3. Please allow slight manual measurement deviation for the data.
