NOTE:
(1)Please check if your Android monitor supports AHD720P before purchasing
(2)Our car camera only supports Android large screens. Please check carefully before purchasing
(3)Because there may be slight differences between carsproduced in different countries, please check the size beforebuying.
Note: Cameras with CVBS CCD video signal is universal for all monitors, but AHD signal will only work with AHD monitor!
*If AHD cannot be selected, AHD cameras are not supported!
Go to Car settings >>Factorysettings>> Reverse (picture) settings
>> Select AHD 720P
*If your Android device does not support AHD signal, you need to
set it to CVBS signal. Before setting it up, you need to check if the
car camera has switched to CVBS signal, otherwise there may be
no signal
Set the CVBS System,Go to Car Setting >> Factory Setting >>
Reverse (Picture) Setting >> Select CVBS NTSC
Conversion Line Control
*If you need to switch the camera to AHD signal, simply cut the green line. However, it should be noted that before cutting the line, you need to check if your Android device supports AHD signal,
Possible issues that may arise during
the installation process
After installation, black screen, no signal,
blurred screen, and black and white image appear
Resolvent:
1. Check if the camera cable is not properly connected
2. First, check if the Monitor is on the same channel as the camera,
as our camera is Dual channel camera, so it is necessary to confirm
whether the camera is a CVBS or AHD channel, usually The
default is CVBS channel, and after cutting the green line,
it becomes AHD channel. After confirming the camera channel,
It is necessary to set up channels corresponding to the camera
on the car Monitor, such as the camera For AHD channel,
the monitor needs to be set to AHD 720P channel. If the camera If it is
a CVBS channel, set the Monitor to CVBS/NTSC
