*All data on this page, unless otherwise specified, is sourced from external laboratories. Due to environmental differences, actual usage may vary slightly.
*The Mi Home Inflator 2 does not come with a Type-C charging cable and power adapter, which users need to purchase separately.
*The weight of the Mi Home Inflator 2 does not include the weight of the French nozzle conversion head, air needle, quick connect nozzle conversion head, or storage bag, and is approximately 490g.
*The tire pressure detection accuracy of the Mi Home Inflator 1 is ±2psi, while the Mi Home Inflator 2 has been upgraded to ±1psi.
*Inflation from 0psi to an average of 120psi for a 700c road bike tire takes approximately 86 seconds at an ambient temperature of 25°C±2°C.
*At full charge, this product can inflate at least 2 205/55 R16 car tires from 0 to 2.5 bar at an ambient temperature of 25°C±2°C.
*At full charge, this product can inflate up to 10 205/55 R16 car tires from 2.0 to 2.5 bar in approximately 2 minutes per tire at an ambient temperature of 25°C±2°C.
*At full charge, this product can inflate a 205/55 R16 car tire from 0 to 2.5 bar in approximately 8 minutes at an ambient temperature of 25°C±2°C.
The inflator precisely displays the remaining battery power with a four-grid indicator
Four-grid Battery Display for Accurate Remaining Power Indication
Switch on-Take out the hose,Switch off-Put in the hose
Set your desired pressure value or select a preset mode, and the inflator will do the rest. Once the inflation is complete, it will automatically stop without any need for supervision, making it effortless and worry-free. The digital sensor chip used in the inflator ensures precise tire pressure detection with an accuracy of up to 1psi*.
Weighing only about 490g*, the simple and compact design of the inflator makes it easy to carry around while on the go. Whether you need to store it in your backpack, car, or at home, its small and sleek design won't take up much space.
The built-in 2000mAh high-rate lithium battery provides ample power. Without an external power supply, you can say goodbye to cable constraints
Built-in lithium battery allows for free inflation anytime and anywhere.
The newly added quick connector conversion head allows for easy and fast installation of the nozzle. With a wide variety of accessories, it can adapt to more inflation scenes.
Added quick connector conversion head for quick and clean installation.
Manual（Chinese）X1
Storage bag x1
Gas needle x1(,American air nozzle interface Φ6.9mm ,French air nozzle conversion head Φ6mm,Fast air nozzle conversion head Φ6.9mm)
Battery type: lithium-ion battery
Inflation pressure: 0.2-10.3ba/3-150psi
Working temperature: 10℃~45℃
Charging temperature: 5℃~40℃
Storage temperature: -10℃~45℃
Rated capacity: 2000mAh (14.4Wh)
type C Charging （not include cable need inferiorty）
Package Contents:
Inflatable treasure x1
French air nozzle conversion head Φ6mm
F ast air nozzle conversion head Φ6.9m
American air nozzle interface Φ6.9mm
Air nozzle size (inside diameter) :
Rated input 5V=2A
Rated capacity 2000mAh(14.4Wh)
product size : 123×75.5×45.8mm (bare machine size, without air pipe).
product Weight:about 490G
Product model : MJCQB06QW
Name:Mijia Air pump 2
Specifications:
★Built-in lithium battery
★Lightweight, portable and easy to store.
★Built-in lithium battery to get rid of wires.
★ 6 modes are free to switch elders use no barriers.
★The preset pressure is fully charged and stops immediately, saving effort and worry.
★The air pressure sensor upgraded to a digital chip, the tire pressure detection accuracy is increased to ±1psi*, the error is smaller, there is no need to rely on the foot to repeatedly check whether it is full.
★Gas flow rate increased by about 25%
★Inflatable battery life increased by about 25.4%, Can replace about 10 tires.
Compared with the old Mijia inflatable treasure 1
Newest Mijia air pump 2 Portable Smart Digital Tire Pressure Detection Electric Inflator Pump For Bike Motorcycle Car Football,Motorcycle Car Football,electric scooter
