——YTBTK Bluetooth Kit
Nowadays, using mobile phone during driving is widely considered dangerous
,and hands free car kit ensures driving safety. As the using of smart phone is
widespread, it is urgent need for most of drivers to enjoy huge music sources and
other Apps of their smart phone via car stereo.
For above demands, Yatour Bluetooth Car Kit (BTK) is released. Developed
according to original protocol of OEM car stereo, BTK is a high-tech product
innovatively integrated with latest standard Bluetooth technology.
Installation guidance:
1, Plugs in to the back of the Car Stereo. It uses CD changer port of your stereo.
2, Plug-and-play operation.
3, Works as an AUX Input converter for any MP3 player.
To remove your existing car radio, You may be able to find more information via websites or by contacting a dealer/qualified installer.
Fit for Lexus LS430 2001-2006
compatible radio head units:
please check the back of your radio if come with 20 pin connector.thanks!
Note:Before bidding ,Please confirm your car can use this CD changer,if possible
please sent usthe picture of your car's headunit(front and back).we will confirm it for you,thanks!
Specification:
Module size: 74 x 62 x 20mm
Voltage Input : 11V~14.6V DC Operational Current : 600mA
Standby Current : 20mA Operating Temperature: -35℃~+75℃
DAC Resolution : 20bit Total Harmonic Distortion : 0.05%
SN Ratio : 90dB Frequency Response : 20HZ-20KHZ
Features:
1. Plug & Play: installed via original CD changer port, easy and fast, perfectly
integrated with the car.
2. Hands-free Phone Call (HFP): supports Answer/Hang up etc., via car radio
buttons and steering wheel buttons.
3. Wireless A2DP Playback: easily streaming music of Bluetooth devices into
factory car stereo system.
4. Bluetooth AVRCP Control: controls Prev/Next Track, Pause/Play, Fast
forward/backward via car radio buttons or steering wheel easily and safely.
5. AUX Input: Supports 3.5mm auxiliary input, able to connect any external
audio sources.
6. Hi-Fi Sound Quality: Connected to car stereo via wire harness, no
interference and no loss of sound quality, rivaling original CD sound.
BTK allows you to easily have popular configuration of advanced car stereo, is
the best choice for safe driving and enjoying digital music.
Installation Preparation
1. The product only operates on a vehicle with 12 Volt DC negative ground
system. Do not use it on other voltage system.
2. This product only fits OEM or aftermarket car stereo with CD changer port,
and different solutions of Bluetooth adapter would be adopted according to
different brands of vehicles or different car radios.
3. Make sure car stereo is powered off before installation, otherwise the car
stereo may be damaged. It is suggested to install it at car dealer shop or
professional car stereo store.
4. Usually, the car stereo needs to be removed so as to plug BTK’s main
connector into CD changer port on radio back. For some car models, BTK can be
installed in glove box or trunk where external CD changer port is located
(Requires special splitter cable).
Working Modes Instruction
After finishing installation of BTK, press once or twice the CD (or Disc /
Mode / CDC / SOURCE / AUX etc.) button to switch to CD changer working
mode (BTK mode).
Yatour BTK offers 2 types of working modes: HFP/A2DP mode, AUX IN
mode.
Under BTK Bluetooth HFP/A2DP working modes, the car stereo should
be under CD1 mode, and you should see CD 1-1 on you car stereo.
When you disconnect current bluetooth connection from your mobile
phone and BTK will switch to AUX IN mode, BTK’s AUX input will be valid.
1. BTK doesn't work after installation.
Please check whether the wire harness is correctly connected. And if there
is GND wire (for some car models), please check whether it connects well
with metal parts of car radio.
2.Frequently switching or other unknown reasons cause playback
stuck.
Music playback is from function of mobile phone, you just need to start the
playback from mobile phone menu.
3.External audio input(AUX IN) sounds too low or too much noise.
Adjust volume of earphone output of your external audio device;It is not
proper for external audio devices to use car power, because common
ground noise will occur in this case. External audio device should use its
own battery to play.
4. Why I can still hear the former mobile phone Bluetooth A2DP music
when I plug in AUX device?
When you need AUX IN function, you have to disconnect current
bluetooth connection from your mobile phone and BTK will switch to AUX input mode status .
