New Arrival is coming!!!
JSTAR ONE PRO upgrade version is released.
What to do if your car cannot start on the road suddenly？
You just need a jump starter which could solve your problem easily.
★Start your dead vehicle at once
★Effortless, hassle-free and quick
UTRAI Jstar one 2000A Car Jump Starter
★Jump Start (2000A Peak Current)
★Power Bank (18W fast charging )
★LED Light (SOS/Lighting/Strobe)
★Work light indicator
★Work in -20℃~75℃
Universal For 12V Vehicles
★12V petrol vehicles with displacement not exceeding 8.0L
★12V diesel vehicles with displacement not exceeding 6.0L
★Vehicle type：Car/SUV/Business car/Electric car/Motorcycle/Van/Pick up/Small truck
Power Bank 18W Fast Charging
USB Dual Output Charger
★Different devices at the same time
★USB Output : 5V/3A , 9V/2A ,12V/1.5A
★Power Bank
★18W Fast Charging
Power for 12V Car Refrigerator & Vacuum Cleaner
★Cigarette Lighter Adapter for All 12V Electrical Product
Emergency & Traveling LED Flashlight
★Normally on
★SOS
★Sharp flash
Compass for your car
★Make your trip never get lost
Safer to use,Multiple protection
★ reverse polarity protection
★over-voltage protection
★over-current protection
★short circuit protection
★over-charge protection
★overload protection
Easy to use
1: Press power button
2 :Insert the battery clip
3 :Connect the positive/negative clips to the battery
4 :Start your car
Layout
Package Including:
1*Jump Starter
1*Smart Clamps
1*DC Cigarette Lighter Adapter
1*USB To Type-C Cable
1*Carrying Case
1*7 languages User Manual (Russian & English & Spanish& French & German& Italian &Japanese)
Attention pls!!! We upgrade device outside package!
Recently we receive message from some customer to feedback "2000A" sign doesn't in the device, that is because we upgrade the package, the newest device u receive is without 2000A. Without 2000A device just produce recently, and about this change, u could check in Utrai official website too, pls don't worry.
Q : How to charge your UTRAI starter?
Type C Charging your Jump Starter anywhere 4-5 hours full Charging
★At Home :
1. Plug the USB cable into computer or any USB 2A wall adaptor (not included).
2. Connect the Type-C port into the Jump Starter.
★In Car :
1. Plug the car adaptor (not included) into the socket.
2. Connect the Type-C port into the Jump Starter.
★Outdoor :
You can use the solar charging panel to charge the jump starter,
but pls confirm the output voltage/current is ≤DC5V/3A，
otherwise the jump starter will enter the protection state.
Q : How to know the connection error?
★Ready to work —Flashing red and green
★Work status — Green light is working
★Connect error —Wrong sound and red light
★Low power — Red light
1. Is the jump starter suitable for my vehicle?
Your car bettery voltage should be 12 volt, and the engine power should be under the listed max engine power.
JS-One: 8.0L gas / 6.5L diesel.
2. Can jump starter charge car battery or be used for an electric car?
No. It can’t.
3. What are the operating temperatures for JS?
Utrai JS can operate within the temperature range -4ºF to 140ºF (-20ºC to 60ºC). JS is equipped with thermal sensors that will prevent it from operating outside of this temperature range for your own safety.
4. How often should my unit be recharged?
We recommend to recharge the Utrai Jump Starter every 3 months and keep more than 50% battery to start your car for emergency.
5. Can the battery inside JS be replaced?
No. We do not replace the batteries or repair the units, but replace the whole unit if it tests faulty.
6. Why is the red light always on and sound the horn?
When using the positive and negative terminals will be connected to reverse the alarm, the correct operation is the red clip clip positive, black clip clip negative, you need to remove the connection cable to reconnect positive and negative use.
7. Why the jump starter doesn’t work?
Jump starter can only start your car when the car battery is dead.
In other conditions, such as car battery or alternator is broken, the jump starter will not work.
8. What should I do if this unit can’t start a vehicle?
Recharge this unit fully, and try to press the power button after connecting the vehicle battery correctly, a solid green light will show on the clamp or READY(Solid) will appear on the screen ( for some models have the LCD screen), then start the vehicle within 30s. If it still does not work, contact us at:marketing@utrai.com ( Attach your order ID).
