Skip to content

EAFC Wireless High Pressure Car Washer 60Bar Flushing 3 Spray Modes Built-in Lithium Battery for Detailing Yard Patio Cleaning

$129.72

100% New: We check every machine with water. it flow out some water is normal.

Specification :
Product name :Car wash water gun
Motor type : Pure copper motor
Water pressure : 60Bar
Wattage : 160W
Drive: Built-in Battery Lithium battery wireless drive
Battery capacity : 12000mAh
Endurance :18-30 minutes
Water pipe length: 5 meters
Spray mode :Direct, Fan
Car washing equipment type: household car washing machine
Water source type: faucet self-priming
Scope of application: car washing, watering flowers, watering vegetables, spraying, garden cleaning, etc.

Features :
1.Powerful 160W Motor & 60Bar Pressure
Pure copper motor and plunger pressurization system deliver 60Bar high-pressure cleaning for tough dirt.

2. 3-in-1 Cleaning Modes
Straight Jet: Focused high-pressure stream for stubborn stains.
Fan Spray: Wide coverage for gentle cleaning.
Foam Cleaning: Fine, uniform foam for deep car washing (Foam Pot included).Cordless & Long-Lasting

3.Built-in 12000mAh lithium battery (6 cells) provides 18-30 minutes of cordless operation. for easy portability indoors and outdoors.

4.Fine filter ensures precision impurity filtration for cleaner water and machine longevity.Plug-and-Play Convenience

Package included:
1x Washing Machine
1x Charger
1x 5m Water pipe
1x 0°-45 °Outlet head
1x Quick connector
1x Extension rod
1x Filter
1x Foam pot
1x Manual


Q & A

Q1: Why does the car washing machine not start after turning on the switch?he water pressure so small?
A1: Maybe the battery is out of power, please charge

Q2: Why is there no water after turning on the car washing machine
A2: Observe whether the water pipe is bent and the water cannot be released; press the car washer for more than 15 seconds and wait for the water to be sucked into the car washer

Q3:Water leaking from multi-function nozzle,Sudden increase in water pressure
A3:The multifunction nozzle is blocked,replace the nozzle

Q4:Water flows out after the machine is turned off
A4:There is water residue in the pump door after the machine is turned off

Q5:Foam bottle can’t spray ? cleaning agent
A5:Drain the water completely before storing foam bottle clogged,clean with water

Q6: It can be started, but there is little or no water from the nozzle?

A6: 
It may be that the water connector is not pressed tightly. Press the water connector directly twice for the second time until you hear a click.
It may be that air has entered the fuselage or the water pipe. You can directly fill the fuselage with water with a tap to drain the air, and then spray water by self-priming.

Q7: Battery indicator light off?
A7:Use a screwdriver to disassemble the battery case, and press and tighten the four iron pieces at the four corners of the circuit board.

Q8: Battery charged but won’t start? Product does not start?
A8:It may be because the inserts inside the machine are loose or wet. Use a screwdriver to disassemble the battery case to see if the battery circuit board is wet. If it is only a little wet, it can be air-dried. If the entire circuit board is wet, scrape off any rusted areas and air dry. If it is not wet, just clamp the corners of the battery circuit board and a few iron pieces in the middle. If you don’t know how to disassemble the machine, you can try knocking the gun head down on the ground or on the table a few times.
During use, be careful not to seepage of water in the battery, it will be recharged every time it is used up, and the battery will be thrown upside down.
If you have any problem, pls feel free to contact us give you a best solution,OK?
Thanks in advance.

Scan the QR code to see problem ideo:  

Warm Tips:

1.After the car wash machine is used, it should run empty for a few seconds to drain the residual water in the machine, avoid oxidizing dirt and freezing for weather reasons, and store it in a dry and cool place.

2.Do not store in the trunk of the car in hot weather to avoid fire caused by high temperature.

3.Batteries need to be kept away from water.Remove the battery after use, so as not to affect battery life.

High-Pressure Car Washer
Long range, 160W high power
Wash your car more easily

Plunger pressurization
Pure copper motor
Bucket/stream bottle self-priming
Two water type adjustment
Built-in lithium battery
Cordless harness

12000mAh
Built-in Battery

Built-in 6 batteries, can last for 18~30 mins

Pressure Washing
Cordless bundle, home and outdoor can be used,
multi-purpose one machine to deal with

Car washing
Yard washing
Garden spraying
Ground washing

Three Cleaning Modes
Comprehensive response to different locations,
cleaning more convenient
Straight jet
Fan spraying
Foam cleaning

Plug and play, rotary lock
Car wash essentials, foam sprayer

Foam Pot Cleaning
Play foam, car wash good helper,
foam fine and uniform, cleaner cleaning

Fine Filter
Precision filtration of impurities, increased
water purification and improved filtration effect


Product name | Car wash water gun
Motor type | Pure copper motor
Water pressure | 60Bar
Wattage | 160W
Battery capacity | 12000mAh
Endurance | 18-30 minutes
Spray mode | Direct, Fan
Net weight | 964g
More than just car wash
More suitable for a variety of cleaning purposes
Yard flushing/watering plants/kitchen cleaning/crop washing
 
Question & Answer:
1 No water after startup?
A. Machine may entered air: please connect the faucet, running water will discharge the air, then used normally
B. Press button more than 15 seconds. let the water inhale the gun body
 
2 Low water pressure after starting?
A. Hose bend: straighten the hose
B. Connector is loose: press water connector directly, twice to hear a click
C. Dead battery: please charge
 
3 The machine does not start
A. Dead battery: please charge
B. Battery immersion: shake the battery upside down a few times
C. Inserts loose: corners and middle of the battery circuit board to pressed tightly
 
4 Foam bottle can’t spray?
Need to wait for the water to drain before spraying the cleaning agent
 
5 Scan the QR code to see problem ideo:  
 
 
 
 
 
 

 

With Water Pipes

Yes

Hign-concerned Chemical

None

Origin

Mainland China

Interface Material

Copper

Body Material

Copper

Handle Type

Palm Type

Water Spray Type

Water Column

Brand Name

EAFC

Nozzle Material

Engineering Plastic

Water Pipes Length

5-10m

Material

ABS and copper

Product pressure

60Bar

Power Supply

Lithium battery

40wh

Working time 20~40Mins

80wh

Working timeWorking time 40~60 Mins

Max flow rate

270L/H

distance

5 meters