Working voltage:4.8V ~ 6V
Working temperature: -20C°~ +60C°
Torque :4.8V /17.2kg.cm
6.0V /20.3kg.cm
Idle speed :4.8V/0.15sec / 60 deg
6.0V/0.13sec / 60 deg
Steering angle: 180 / 270 degree
Idle current:4.8V/470mA 6.0V /650mA
Load current :4.8V/750mA 6.0V /950mA
Dead band :2usec
Lifetime:>15000 times without load
Moving angle:60°±10°
Drive type: MOS drive
Motor type:Cored motor
Potentiometer type:Direct drive
Signal booster type:Digital
Size:40.5X20.2X40.3mm
Weight : 62g (without accessories)
Ball Bearing:2BB
Gear material:Metal gear
Case material: PA66+fiber40%
Wire length:260mm
Wire gauge No and plug type:26AWG,JR plug
Brown wire:Negative
Red wire:Positive
Orange wire:Singal
Application: RC car, RC airplane, Helicopter
25KG Servo:
Mechanical Specification:
1. Size: 40.0*20.5*40.5mm
2. Weight: 56g±2g
3. Gear type: 5 Metal
4. Limit angle: 360°
5.Bearing: 2BB
6. Horn gear spline: 25T Diameter:5.9mm
7. Horn type: Plastic, POM
8.Case : Engineering plastics(PBT)+Aluminum alloy
9. Connector wire: 320mm±5mm
10.Motor: Carbon brush motor
Electrical Specification:
1.Operat voltage: 4.8V – 7.2V
2.No load speed: 0.18sec/60° – 0.14sec/60°
3.Running current: 140mA – 200mA
4.Peak stall torque: 23.5kg.cm-26.8kg.cm
5.Stall current: 2600mA±10% – 3400mA±10%
6.Working voltage range: 4.8 – 7.2V
Control Specification:
1.Command signal: Pulse width modification
2.Amplifier type: Digital controller
3.Pulse width range: 500~2500usec
4.Neutral position: 1500usec
5.Running degree: 180°±3°(when 500~2500usec)
6.Dead band width: 5 usec
7.Rotating direction Counterclockwise: (when 1000~2000usec)
30KG Servo:
Mechanical Specification:
1. Size: 40.0*20.5*40.5mm
2. Weight: 56g±2g
3. Gear type: 5 Metal
4. Limit angle:360°
5. Bearing:2BB
6. Horn gear spline: 25T Diameter: 5.9mm
7. Horn type: Plastic, POM
8. Case: Engineering plastics(PBT)+Aluminum alloy
9. Connector wire320mm±5mm
10. MotorCarbon brush motor
Electrical Specification:
1. Operat voltage: 4.8V – 7.2V
2. No load speed: 0.24sec/60° – 0.17sec/60°
3. Runnig current: 140mA – 200mA
4. Peak stall torque:29.5kg.cm – 32kg.cm
5. Stall current: 2600mA±10% – 3400mA±10%
6. Working voltage range: 4.8 – 7.2V
Control Specification:
1. Command signal: Pulse width modification
2. Amplifier type: Digital controller
3. Pulse width range: 500~2500usec
4. Neutral position: 1500usec
5. Running degree: 180°±3°(when 500~2500usec)
6. Dead band width: 5 usec
7. Rotating direction: Counterclockwise (when 1000~2000usec)
Note: Our 30KG 360 degree servo, it rotates continuously.
35KG Servo:
Specification:
1. Size: 40.0*20.5*40.5mm
2. Weight: 56g±2g
3. Gear type: 5 Metal
4. Limit angle: 360°
5. Bearing: 2BB
6. Horn gear spline: 25T Diameter :5.9mm
7. Horn type: Plastic, POM
8. Case: Engineering plastics(PBT)+Aluminum alloy
9. Connector wire: 320mm±5mm
10. Motor: Carbon brush motor
Electrical Specification:
1. Operat voltage: 4.8V – 7.2V
2. No load speed: 0.32sec/60° – 0.22sec/60°
3. Runnig current: 140mA – 200mA
4. Peak stall torque: 32.7kg.cm – 35.2kg.cm
5. Stall current: 2600mA±10% – 3400mA±10%
6. Working voltage range: 4.8 – 7.2V
Control Specification:
1. Command signal: Pulse width modification
2. Amplifier type: Digital controller
3. Pulse width range: 500~2500usec
4.Neutral position: 1500usec
5. Running degree: 180°±3°(when 500~2500usec)
6. Dead band width: 5 usec
7. Rotating direction: Counterclockwise (when 1000~2000usec)
60kg Servo:
Mechanical Specification
1. Size 65*30*48mm
2. Weight 158g±5%
3. Gear type "6 Metal"
4. Limit angle 360°
5. Bearing 2BB
6. Horn gear spline 18T diameter:8.1mm
7. Horn type Plastic, POM
8. Case "Engineering plastics(PBT)+Aluminum alloy"
9. Connector wire 320mm±5mm
10. Motor Carbon brush motor
11. Splash water resistance
Electrical Specification
1. Operat voltage 6V 8.4V
2. Idle current 5mA 5mA
3. No load speed 0.17sec/60° 0.13sec/60°
4. Runnig current 400mA 510mA
5. Peak stall torque 58.5kg.cm 70kg.cm
6. Stall current 8.5A±10% 10.4A±10%
7. Working voltage range " 4.8-8.4V
Control Specification
1. Command signal Pulse width modification
2. Amplifier type Digital controller
3. Pulse width range 500~2500usec
4. Neutral position 1500usec
5. Running degree 180°±3°(when 500~2500usec)
6. Dead band width 5usec
7. Rotating direction Counterclockwise (when 1000~2000usec)
The Drawings: The Wire and plug:
Package included: ( Send it as your choice, as the picture showed)
1PCS / 4PCS 20kg / 25kg / 30kg / 35kg / 60kg servo (There are two kinds of 30KG Servo, send it at random)
1PCS / 4PCS 25T arm
Note:The direction the servo rotates all depends on the signal the servo is receiving.
Special Notice:
The RC Use-Angle 180/270 marked in selections to be shipped by Angle-180/270 servo, Cuz the below signal match with Angle-180/270 servo support PWM signal width 500-2500us.
Transmitter only can generate 1000-2000us, it is half signal of the servo, thus the feedback angle will be half at 90/135.
The Angle 180/270 which request pwm signal width 500-2500us, if you use a transmitter to control them, the angle will be 90/135.