Specifications:
Color:yellow
Size:50*23*8mm/1.97*0.91*0.31inch
Product features
1. Safe power on function: no matter the throttle rocker is in any position, it will not immediately start the motor when the power is switched on, so as to avoid personal injury;
2. Throttle stroke adjustment function: adapt to different remote control oil
The difference of door stroke, improve the linearity of throttle response, with smooth and exquisite speed control feel speed control linearity;
3. Program setting items:
Brake setting: no brake/no brake, factory default is no brake.
Battery type: li-xx (lithium battery)/ni-xx (nickel cadmium or nickel hydrogen), the default value is li-xx (lithium battery).
Low voltage protection mode: reduce power/turn off output, default value is reduced power.
Low voltage protection threshold: low/medium/high, the default value is medium cut-off voltage.
When li-xx battery is set, the number of lithium batteries will be automatically judged. At low/medium/high conditions, the cut-off voltage of each battery is 2.6v, 2.85v and 3.1v respectively.
When the ni-xx battery is set, it will automatically detect the voltage of the battery pack when the power is switched on. In the case of low/medium/high, the cut-off voltage is 0%, 45% and 60% of the input voltage when starting up (0% means no low-voltage protection).
Start mode: normal/soft/super soft start, default is normal start.
Normal start is suitable for fixed wing and can start the motor quickly in 0.2 seconds
Soft start/super soft start for helicopters;Soft start and super soft start of the initial rotation speed is relatively low, from the start to full speed needs 1 second and 2 seconds respectively, but after the start, if the throttle is closed, start again within 3 seconds in the ordinary mode, so as to avoid some stunt flight due to slow reaction and lead to fall.
Input Angle: low/medium/high, the default value is medium.
In general, the low input Angle can accommodate more motors, but in order to improve gao efficiency, it is recommended to use the low input Angle for the 2-pole motor and the middle input Angle for the motor with more than 6 poles.To increase the speed, the entry Angle can be set to a high entry Angle.After improved Angle Settings, first test on the ground before flying.
Restore factory defaultsÂ
4. Comprehensive protection functions:
Undervoltage protection: set by the user through the program;
Overvoltage protection: if the input voltage exceeds 18 volts, it will not be started. It will automatically protect itself and at the same time send out urgent "beep" alarm sound.
Overheat protection: built-in temperature detection circuit, MOS tube when the temperature is too high automatically off the electrical adjustment;
Remote control signal loss protection: the power is reduced after the remote control signal is lost for 1 second, and the output is closed if there is no remote control signal for 2 seconds;
Process characteristics
1. ** ultra-low impedance large-capacity electrolytic capacitor is adopted at the power input end to improve anti-interference ability;
2. The output MOSFET power tube is equipped with independent radiator fin to reduce the temperature rise of devices and improve the system's high current working ability;
3 adopt single chip microcomputer control;
4. The single chip adopts independent voltage stabilizer chip to avoid the power interference caused by the change of BEC load and improve the working stability of the single chip.
Set square method
1.1 output capacity: continuous current of 30A, short-time current of 40A (no less than 10 seconds);
3. Switch on the power supply, if the transmitter is normal, there will be the following sound :(if there is no sound after the sound is a long "di", then check the reverse setting of the accelerator channel of the transmitter.)
B B means LIPO automatic protection
BB BB stands for NIMH /NICD automatic protection
BBB BBB stands for brake selection
Product features
1. Safe power on function: no matter the throttle rocker is in any position, it will not immediately start the motor when the power is switched on, so as to avoid personal injury;
2. Throttle stroke adjustment function: adapt to different remote control oil
Brakes:
3. Program setting items:
A brake setting operation can be made during actual use, so that the motor can brake with the counter electromotive force after the throttle is turned off.
Factory parameter reset function, because this series of electrical adjustment has overheat and misoperation protection function, if you find that your electrical adjustment acceleration, or steering, or throttle curve and any other features and new time changes, then you can do a factory parameter setting to regain zui high performance.
Starting is a long sound of B, indicating that the electric tone is in the automatic protection state of LIPO, and BBB three tones, indicating the automatic protection state of NIMH /NICD.
