1PCS 2-4S 32-bit ESC AM32 Enhanced Version 40A High Power Speed Regulator Support PWM Signal for Crawler Model Airplane Motors
Attention:
If you need to adjust the parameters by yourself, please contact our customer service personnel to obtain the official AM32 parameter-tuning software. We will not provide after-sales service if the ESC fails to function properly due to the improper use of parameter-tuning tools.
Description:
– A new 32-bit ESC product, with a super mini size, very suitable for compact installation, it is a driving tool for various small model airplane brushless motors.
– Selected low-power MOS tube with layout placed on the same side for convenient heat dissipation and strong power.
– Mini size and high power, it is the preferred power for small aircraft, crawler, climbing vehicles.
– The enhanced version integrates the BEC module (5V2A) on the basis of the standard version's unchanged size, adds overcurrent copper bars, adds thermal conductive silicone sheets, and takes all performance to a higher level.
– Supports mainstream control signals such as DSHOT and PWM, with linear at low speeds, violent at high speeds, and smooth speed regulation. It uses AM32 open-source firmware, which can be freely adjusted. It supports bidirectional operation, adjustable drag braking, sine start, and other functions, and fast forward and reverse switching is very smooth.
– Attention! It is strongly recommended to install a large capacity electrolytic capacitor(NOT include, prepare by yourself) outside the ESC to improve its working condition!
– Add low voltage protection function, improve low-speed linear performance.
Specification:
– Item name: 32-bit ESC
– Model: A01-3012
– Firmware: AM32
– Master control: AT32
– Working voltage: 2-4S Lipo
– Support signal: PWM/DSHOT/Sine, etc.
– Standard version size: 32x12x4mm/1.26×0.47×0.16inch
– Enhanced version size: 32x12x7.5mm/1.26×0.47×0.29inch
– Weight: about 3.5g (0.0077 pounds) (standard version) / 6.3g (0.0139 pounds) (enhanced version)
– Standard version:
BEC module: no
Max current: 30A
– Enhanced version:
BEC module: with BEC module, 5V2A
Max current: 40A
Strongly recommended! When using the AM32 ESC, it is necessary to use in conjunction with a parameter adjuster.
Parameter adjuster:
– Working voltage: 5V
– USB port
– Special for AM32 32-bit ESC
Note:
– Size is manual measurement, there are exist errors.
– If you find that the capacitor has fallen off after receiving the product, you can weld it yourself, this will not affect its use. If you mind this, please do not place an order.
Package include:
1pcs x ESC
or
1pcs x parameter adjuster
If you don't know how to wire it, it is recommended that you directly purchase an AM32 ESC that has already been wired.
Below picture is enhanced version AM32 ESC with welding wire. If you are interested, you can click on the link to browse through it.
